Automatic Nitrile Glove Packing Machine Supplier

Automatic Glove Packing Machine Working Principle:
The packaging film moving device transports the packaging roll film, the feeding panel motor transports the gloves through the stainless steel chain, press the start button, after the film and material are fed into the forming bag maker by the feeding conveyor, through end-sealed tool holder, the cutter motor performs longitudinal sealing and transverse sealing and cutting, then output by the discharge conveyor belt.


Nitrile Glove Packing Machine Features:
❤Adopt frequency conversion speed regulation, microcomputer controller control system, PlD digital display intelligent temperature controller, photoelectric detection two-way tracking system, small screen display system and circuit protection system to achieve stepless speed change, automatic tracking of the cut point, accurate temperature control, high packaging accuracy, and safety.
❤Compact structure, high packaging speed, stable operation, convenient operation, beautiful appearance of the packaged product, the horizontal and vertical sealing lines are neat and clear. Suitable for the packaging of solids such as biscuits, instant noodles, chocolate, soap, etc. It is widely used in food, chemical, daily necessities, medicine and other industries.

Automatic Glove Packing Machine Safe Operation:
1. After the installation is completed, please check the bolts and nuts of each part, and there must be no untightened phenomenon.
2. Please cover all the protective covers before runing the machine, and remove the tools, rags and other sundries from the machine to avoid damage to the machine.
3. Before starting the machine for the first time, please turn the large handwheel by hand to make the machine run for a few times, and make sure that there are no faults before it can be powered on.
4. When the nitrile glove packing machine is working, the temperature of the vertical and horizontal sealer can reach 200℃ or even higher. Please do not touch the sealer to avoid burns.
5. If there is an abnormal situation during the operation of the machine, please stop it for inspection immediately, and contact the manufacturer if necessary.
6. Please check the effectiveness of the emergency stop switch before each operation.