How To Clean Manual Filling Machine?

Manual filling machine mainly used for filling various liquids, therefore, the machine must be kept clean, and it must be inspected and cleaned strictly to prevent contamination of the materials after filling. But how to clean manual filling machine?
 
Besides the cleaning of the filling machine, it is also important to keep the filling environment clean and tidy. The most taboo in the production process is that the production line cannot run normally due to the quality problems of the filling machine. Therefore, when using the filling machine, attention should be paid to sterilization, ensuring cleanliness and low temperature filling.
 
Following is some methods about how to clean manual filling machine?
Keep the filling machine piping clean. All pipes, especially those in direct or indirect contact with materials, should be cleaned, cleaned every day and sterilized every time. Ensure that the filling machine is clean, its material trough to be cleaned and sterilized, to ensure that the parts in contact with the material do not have scaling and miscellaneous bacteria.
 
Sterilization is the best method to ensure the biological stability of bottled materials in the production process. The time and temperature of sterilization must be controlled to ensure the final effect. To avoid the sterilization time is too long or temperature is too high, reduce drink oxidation, as soon as possible after sterilization cooling temperature is not more than 35 ℃. Low temperature filling is the minimum requirement for beverage filling. Generally, beverage will not be foamed easily in low temperature environment, which is conducive to filling.
 
Before working, use a scale of 0-1 ℃ water filling machine tank and pipeline temperature is reduced, when the filling temperature exceeds 4 °C, the temperature should be lowered first and then the filling operation is carried out. Use the heat preservation tank and constant temperature irrigation to keep the material at a constant temperature for the specified time of filling, so as to avoid the instability of the filling machine due to excessive temperature changes.
 
Warm prompt: The filling equipment is best isolated from other equipment, the lubricating part of the filling machine and the filling material part should prevent cross contamination.