Manual bottle filling machine is a very popular filling tool, because it has a wide range of filling. But do you know how does a filling machine work?
The working principle is very simple:
Under the action of the reciprocating motion of the piston, the filling effect is achieved. When the piston is twitching, the feed valve opens the feed and the discharge valve closes. When the piston is pushed, the feed valve closes and the discharge valve opens to begin filling the material.
How Does A Filling Machine Work?
1. Plug in the power cord and turn on the power switch.
2. Connect the intake air pipe to the air supply and open the air supply switch.
3. Adjust the working mode of the machine and switch to "Electric".
4. The electric foot switch until there is material flowing out of the filling head.
5. The machine stops automatically after the filling is completed.
In order to ensure the normal operation of the machine, please pay attention to the following matters:
〇 Before the operation, please read the instructions in detail, familiar with the adjustment and use of the machine, and strictly follow the instructions when operating.
〇 Regularly repair and maintain the machine according to the instructions, apply oil to the surface of the fuselage, so as to isolate the air and prevent the machine from rusting.
〇 Ensure that the machine is clean, do not keep foreign matter on it, and avoid corrosion of the feed port caused by long-term accumulation of materials.
〇 Always check the contact area of the machine for good contact and ensure safe use of electricity.
〇 When a fault is found, turn off the power in time, press the emergency stop button if necessary, then check the cause and troubleshoot.
If you have any problems when operate the machine, please contact us for free.
Email: sherry@machinehall.com
phone/whatsapp: +8615515573212
